KINGROON PETG Basic
-
Estimated Delivery:Oct 23 - Oct 27
-
Free Shipping & Returns:Direct shipping from US / EU / CA / MX warehouses
KINGROON PETG Basic
Strong Print
Combines ease of printing with strength and durability
Heat Tough
Good heat resistance and toughness for functional parts
Low Warp
Low shrinkage and warping for reliable printing
Resistant Use
Water and chemical resistant for outdoor and utility use
High strength and Durable
Kingroon PETG is more impact-resistant and tougher, making it ideal for engineering and functional parts in 3D printing.
Less stringing and clumping
The modified formula Kingroon PETG reduces clumping, oozing, and stringing issues during printing.
Vibrant Color Selection
Choose from our extensive palette of vibrant, consistent colors that maintain their appearance after printing.
Our specialized pigment formulation ensures color uniformity throughout the spool and between batches.
Vibrant Color Selection
Choose from our extensive palette of vibrant, consistent colors that maintain their appearance after printing.
3D printing material properties
Fully understand the printing settings, physical properties, and mechanical performance of the materials to optimize your 3D printing experience.
| Nozzle Temp（℃） | 230-250 |
|---|---|
| Bed Temp（℃） | 70-90 |
| Fan | 100% |
| Length | (1.75mm) 330-340m |
| Density | 1.26g/cm³ |
|---|---|
| Melt Index | 20(250C/2.16kg)g/10min |
| Distortion Temp | 62℃(0.45MPa) |
| Izod impact strength | 4.7kj/m² |
| Tensile strength | ≥ 50MPa |
|---|---|
| Elongation at break | 0.82 |
| Bending strength | 65MPa |
| Flexural modulus | 1078MPa |
| Nozzle Temp（℃） | 230-250 |
|---|---|
| Bed Temp（℃） | 70-90 |
| Fan | 100% |
| Length | (1.75mm) 330-340m |
| Density | 1.26g/cm³ |
|---|---|
| Melt Index | 20(250C/2.16kg)g/10min |
| Distortion Temp | 62℃(0.45MPa) |
| Izod impact strength | 4.7kj/m² |
| Tensile strength | ≥ 50MPa |
|---|---|
| Elongation at break | 0.82 |
| Bending strength | 65MPa |
| Flexural modulus | 1078MPa |
Printing Tips
Dry Before Use
Dry before use to ensure the best print quality and consistent finish. Drying conditions: In a blast drying oven: 50°C for 8 hours; In an AMS 2 Pro and AMS HT: 55°C, 8 hours; On an X1 printer's heatbed: 60°C to 70°C for 12 hours. Store in a dry environment after use.
Filament drying instructions on WIKI →Using Refill Filament
The refill filament needs to be used with a spool. For detailed instructions on how to swap in the new filament using the Bambu Reusable Spool, please refer to the guide on WIKI.
Spool refill guide on WIKI →