KINGROON 10KG PLA Plus Basic 3D Printer Filament
The picture is for reference only. Please adhere to the original products in case of any mistakes.some rolls are plastic while other are cardboard at random and it cant be chosen
KINGROON 10KG PLA Plus Basic 3D Printer Filament
Strong Build
Increased impact resistance and mechanical strength
Tight Bond
Superior layer bonding reduces splitting and breaking
Easy Print
Retains the easy printability of standard PLA+
Best Choice
The best choice for functional prototypes and parts
Eco-friendly
Kingroon PLA filament is made from plant-based starches like corn and cassava. This renewable, plant-based material is biodegradable and eco-friendly, posing no harm to the environment.
High Toughness
Our PLA+ provides excellent toughness and impact resistance, preventing breakage under high pressure and impact.
High Accuracy and Quality
Dimensional accuracy of +/- 0.03mm. Rigorous quality control ensures consistent filament dimensions, keeping your 3D printing tangle-free.
Your Go-To for Everyday Creativity
A versatile and eco-friendly material perfect for prototyping, models, and daily creations.
3D Printer Filament
Fully understand the printing settings, physical properties, and mechanical performance of the materials to optimize your 3D printing experience.
| Nozzle Temp（℃） | 200-220 |
|---|---|
| Bed Temp（℃） | 50-70 |
| Fan | 100% |
| Length | (1.75mm) 330-335m |
| Density | 1.2g/cm³ |
|---|---|
| Melt Index | 14(190℃/216kg)g/10min |
| Distortion Temp | 53℃(0.45MPa) |
| Izod impact strength | 5.4kj/m² |
| Tensile strength | ≥ 50MPa |
|---|---|
| Elongation at break | 0.112 |
| Bending strength | 91MPa |
| Flexural modulus | 1913MPa |
| Nozzle Temp（℃） | 200-220 |
|---|---|
| Bed Temp（℃） | 50-70 |
| Fan | 100% |
| Length | (1.75mm) 330-335m |
| Density | 1.2g/cm³ |
|---|---|
| Melt Index | 14(190℃/216kg)g/10min |
| Distortion Temp | 53℃(0.45MPa) |
| Izod impact strength | 5.4kj/m² |
| Tensile strength | ≥ 50MPa |
|---|---|
| Elongation at break | 0.112 |
| Bending strength | 91MPa |
| Flexural modulus | 1913MPa |
Printing Tips
Dry Before Use
Dry before use to ensure the best print quality and consistent finish. Drying conditions: In a blast drying oven: 50°C for 8 hours; In an AMS 2 Pro and AMS HT: 55°C, 8 hours; On an X1 printer's heatbed: 60°C to 70°C for 12 hours. Store in a dry environment after use.
Filament drying instructions on WIKI →Using Refill Filament
The refill filament needs to be used with a spool. For detailed instructions on how to swap in the new filament using the Bambu Reusable Spool, please refer to the guide on WIKI.
Spool refill guide on WIKI →