KINGROON 10 Spool PLA Basic 3D Printing Filament 1.75mm
-
Estimated Delivery:Jun 19 - Jun 23
-
Free Shipping & Returns: Direct shipping from US / EU / CA / MX warehouses
KINGROON 10 Spool PLA Basic 3D Printing Filament 1.75mm
Consistent Flow
Delivers consistent diameter for clog-free printing
Low Warp
Low warping and easy to use for beginners
Eco Friendly
Eco-friendly material made from renewable resources
Wide Fit
Wide compatibility with most FDM 3D printers
Eco-friendly
Kingroon PLA filament is made from plant-based starches like corn and cassava. This renewable, plant-based material is biodegradable and eco-friendly, posing no harm to the environment.
High Accuracy and Quality
Dimensional accuracy of +/- 0.03mm. Rigorous quality control ensures consistent filament dimensions, keeping your 3D printing tangle-free.
Neat Winding
Neat winding minimizes the filament tangle, ensuring a smooth printing experience.
Vibrant Color Selection
Choose from our extensive palette of vibrant, consistent colors that maintain their appearance after printing.
3D printing material properties
Fully understand the printing settings, physical properties, and mechanical performance of the materials to optimize your 3D printing experience.
| Nozzle Temp（℃） | 190-210 |
|---|---|
| Bed Temp（℃） | 50-70 |
| Fan | 100% |
| Length | (1.75mm) 330-340m |
| Density | 1.23g/cm³ |
|---|---|
| Melt Index | 12-15(190℃/216kg)g/10min |
| Distortion Temp | 53℃(0.45MPa) |
| Izod impact strength | 3.9 kj/m² |
| Tensile strength | ≥ 38 MPa |
|---|---|
| Elongation at break | 0.15 |
| Bending strength | 60MPa |
| Flexural modulus | 2700MPa |
| Nozzle Temp（℃） | 190-210 |
|---|---|
| Bed Temp（℃） | 50-70 |
| Fan | 100% |
| Length | (1.75mm) 330-340m |
| Density | 1.23g/cm³ |
|---|---|
| Melt Index | 12-15(190℃/216kg)g/10min |
| Distortion Temp | 53℃(0.45MPa) |
| Izod impact strength | 3.9 kj/m² |
| Tensile strength | ≥ 38 MPa |
|---|---|
| Elongation at break | 0.15 |
| Bending strength | 60MPa |
| Flexural modulus | 2700MPa |
Printing Tips
Dry Before Use
Dry before use to ensure the best print quality and consistent finish. Drying conditions: In a blast drying oven: 50°C for 8 hours; In an AMS 2 Pro and AMS HT: 55°C, 8 hours; On an X1 printer's heatbed: 60°C to 70°C for 12 hours. Store in a dry environment after use.
Filament drying instructions on WIKI →Using Refill Filament
The refill filament needs to be used with a spool. For detailed instructions on how to swap in the new filament using the Bambu Reusable Spool, please refer to the guide on WIKI.
Spool refill guide on WIKI →